Autocraft Battery Charger Ac-60cr Manual Upd ❲360p 2024❳

) terminal or a bare metal ground point on the vehicle chassis. : Toggle the switch to your desired mode.

: Always connect clamps before plugging in the power cord, and unplug the cord before removing clamps. autocraft battery charger ac-60cr manual

When you first connect a discharged battery, the needle will jump up toward the selected rate (e.g., near 10A or 35A). ) terminal or a bare metal ground point

: Offers a 10-amp fast charge for standard automotive batteries and a 2-amp trickle charge for smaller batteries (motorcycles, lawn tractors) or long-term maintenance. When you first connect a discharged battery, the

Hours to Charge=Battery Amp-Hour (Ah) RatingCharger Amperage SettingHours to Charge equals the fraction with numerator Battery Amp-Hour (Ah) Rating and denominator Charger Amperage Setting end-fraction Approximate Charging Times (12V Battery) Battery Size / Type 2-Amp Setting 10-Amp Setting 35-Amp Setting Do Not Use Do Not Use Compact Car Battery (approx. 40 Ah) Standard SUV / Truck (approx. 70 Ah) Large Marine Deep-Cycle (approx. 100 Ah) Safety Warnings and Best Practices

: Once charging is complete, turn the timer to OFF , unplug the AC cord from the wall outlet, remove the negative clamp from the vehicle frame, and finally remove the positive clamp from the battery. 2. Charging a Battery Outside the Vehicle