If you have ever plugged a USB-C cable into your Check Point appliance and heard the "device connected" chime but saw nothing in PuTTY or SecureCRT, you are missing the correct . This article provides a deep dive into what this driver is, where to find it, how to install it across Windows, Linux, and macOS, and how to troubleshoot the most common failure scenarios.
Set the speed to 115200 (default for modern Check Point appliances) 1.2.5 . Serial Configuration Details: Data bits: 8 Stop bits: 1 Parity: None Flow control: None checkpoint usb-c console driver
Because most cables are standard FTDI chipset-based, you can often download the drivers directly from the FTDI website. 3. Installing the Driver (Windows 10/11) If you have ever plugged a USB-C cable
lsmod | grep cp210x # or lsmod | grep ftdi_sio Serial Configuration Details: Data bits: 8 Stop bits:
Contrary to what some forums claim, Check Point does not maintain a universal driver repository. Instead, they rely on the chip manufacturer’s drivers. However, Check Point does provide links and pre-packaged drivers within their and FPGA packages.
This is almost always caused by a baud rate mismatch. Ensure the speed is set to 115200115200 and that flow control is disabled. Conclusion