Placa | Mae Dell Mih61r Mb 10097-1 Manual __link__

When case-swapping the Dell MIH61R into a standard aftermarket PC case, the most challenging part is connecting the front power button, power LED, and HDD LED. Dell uses a proprietary 9-pin block layout. Here is the pin mapping for the header: 2 4 6 8 10 . . . . [Empty] . . . . . 1 3 5 7 9 Use code with caution. Pin Number Description Pin 1 HDD LED (+) Hard Drive Activity Light Positive Pin 3 HDD LED (-) Hard Drive Activity Light Negative Pin 2 Power LED (+) Power Indicator Light Positive Pin 4 Power LED (-) Power Indicator Light Negative Pin 5 Power Switch (-) Ground for Power Button Pin 6 Power Switch (+) Power Button Signal Pin 7 Reset Switch (+) Reset Signal (Not used by default Dell chassis) Pin 8 Reset Switch (-) Ground for Reset Pin 9 Leave Empty Pin 10 Key / Missing No pin present Rear I/O Ports and Internal Connectors Rear Panel Ports 1 x VGA Port 1 x HDMI Port 6 x USB 2.0 Ports 1 x RJ-45 Gigabit Ethernet Port 3 x Audio Jacks (Line-in, Line-out, Microphone) Internal Expansion Connectors

[ 2 ] [ 4 ] [ 6 ] [ 8 ] [10] (Pinos de cima) [ 1 ] [ 3 ] [ 5 ] [ 7 ] [ 9 ] (Pinos de baixo) Pinos 6 e 8 Power LED (Luz de Ligado): Pinos 2 (+) e 4 (-) HDD LED (Luz do Disco Rígido): Pinos 1 (+) e 3 (-) placa mae dell mih61r mb 10097-1 manual

The board contains only two critical jumpers: When case-swapping the Dell MIH61R into a standard