Specs !new! | Cerwin Vega At40

If you're looking for a reliable, high-performance loudspeaker that won't break the bank, the Cerwin-Vega AT40 is an excellent choice.

was manufactured decades ago, encountering a pair in the wild usually requires a bit of maintenance. Foam Rot Resurfacing cerwin vega at40 specs

Positive Temperature Coefficient (PTC) automatic reset circuit It stands 73cm tall, 36cm wide, and 35cm

The AT-40 is a floor-standing loudspeaker with dimensions that are substantial but not overly large. It stands 73cm tall, 36cm wide, and 35cm deep, weighing in at 18 kilograms per speaker, which feels sturdy and well-constructed. For connectivity, the rear panel features simple binding posts (often referred to as "klemmer" in Danish forum posts), which accept bare wire or spade connectors. It was engineered to deliver high sound pressure

The Cerwin-Vega AT-40 is a large, 3-way floor-standing loudspeaker designed during the late 1980s and early 1990s. It was engineered to deliver high sound pressure levels (SPL) with minimal distortion. Specification 3-Way Floor-standing Bass Reflex Woofer Size 10-inch (with cast aluminum basket and red surround) Midrange Size 5-inch cone Tweeter Type 1-inch Micro-cell Polymer Dome Frequency Response 35 Hz – 22,000 Hz Power Handling 5 Watts (Minimum) to 150 Watts (Continuous/RMS) Sensitivity / Efficiency 97 dB @ 1 Watt / 1 Meter Nominal Impedance Crossover Frequencies 400 Hz and 3,000 Hz Controls High-frequency and Mid-frequency level attenuators Enclosure Dimensions Approx. 28.5" H x 14" W x 11.5" D Weight Approx. 45 lbs (20.4 kg) per speaker Anatomy of the AT-40: Component Breakdown 1. The 10-Inch Low-Frequency Woofer

The original red foam surrounds are notorious for "foam rot"—a natural degradation where the foam crumbles away over 20–30 years. Do not let rotted foam scare you away from a purchase; re-foaming kits are cheap ($20–$30) and widely available online. It is a straightforward DIY project that restores the woofer to factory specs.